View PD104VT2_321160.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD104VT2
Version : 1.7
TECHNICAL MODEL
SPECIFICATION NO : PD104VT2
Customer's Confirmation Customer
By PVI's Confirmation
Confirmed By
Prepared By
PRIME VIEW INTERNATIONAL CO.,LTD.
3,LI SHIN RD. 1,SCIENCE-BASED INDUSTRIAL PARK,HSINCHU,TAIWAN,R.O.C. http://www.pvi.com.tw
Date:Oct.05,2004
This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1
PD104VT2
TECHNICAL SPECIFICATION CONTENTS
NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
ITEM
Cover Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Absolute Maximum Ratings Electrical Characteristics Power On Sequence Optical Characteristics
Handling Cautions
PAGE
1 2 3 3 3 4 6 8 8 15 16 19 20 20 21 22 25
Reliability Test
Indication of Lot Number Label
-
Block Diagram Packing Diagram Revision History
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2
PD104VT2
1. Application
This data sheet applies to a color TFT LCD module, PD104VT2. PD104VT2 module applies to OA product, car TV(must use Analog to Digital drive board), which require high quality flat panel display.If you must use in high reliability environment can't over reliability test condition. Prime View assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and the precautions in these specification sheet.
2. Features
. Support the DENB mode . Image Reversion : Up/Down and Left/Right . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . Display Colors262,144 colors . Optimum Viewing Direction6 o'clock . +3.3V DC supply voltage for TFT LCD panel driving . Backlight driving DC/AC inverter not included in this module . TTL transmission interface
3.Mechanical Specifications
Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Specifications 26.4(diagonal) 10.4 (diagonal) 640x(R, G, B)x480 262,144 211.2(H)x158.4(V) 0.330(H)x0.330(V) Stripe 243.0(w)x185.1 (H)x12.5 (typ.) (D) 51610 CCFL, 2 tubes Anti-glare and hard-coating Normally white Unit cm inch dot mm mm mm g
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3
PD104VT2
4.Mechanical Drawing of TFT-LCD Module
Outline Drawing : Front View (unit
mm)
CHG DIM 60.010 TO 60.0 -0
+10
1
+10 -0
1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4
QUALITY WARRANTY LABEL
PD104VT2
Outline Drawing : Rear View (unit mm)
Add screw hole Dim. & note item 2
3
1
2
'A'
'A'
3
3
3
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5
3
2. ALLOW DEPTH OF SCREW HOLE 'A' IS 1.7mm MAX, M2 SCREW, TORQUE 1.0 Kgf-cm MAX ALLOW DEPTH OF SCREW HOLE 'B' IS 4.0mm MAX, M2 SCREW, TORQUE 1.5 Kgf-cm MAX
3
'A'
3
'A'
'A'
3
'A'
A
3
3
'B'
'B'
3
QUALITY WARRANTY LABEL
2
'A'
3
'A'
3
3
A
3
PD104VT2
5.Input / Output Terminals
5-1) TFT-LCD Panel Driving Connector type : Con 2 mode DF9A-31P-1V(HRS) Pin No. Symbol Function 1 GND Ground (0V) 2 CLK Clock Signal for Sampling Image Digital Data 3 Hsync Horizontal Synchronous Signal 4 Vsync Vertical Synchronous Signal 5 GND Ground (0V) 6 R0 Red Image Data Signal (LSB) 7 R1 Red Image Data Signal 8 R2 Red Image Data Signal 9 R3 Red Image Data Signal 10 R4 Red Image Data Signal 11 R5 Red Image Data Signal (MSB) 12 GND Ground (0V) 13 G0 Green Image Data Signal (LSB) 14 G1 Green Image Data Signal 15 G2 Green Image Data Signal 16 G3 Green Image Data Signal 17 G4 Green Image Data Signal 18 G5 Green Image Data Signal (MSB) 19 GND Ground (0V) 20 B0 Blue Image Data Signal (LSB) 21 B1 Blue Image Data Signal 22 B2 Blue Image Data Signal 23 B3 Blue Image Data Signal 24 B4 Blue Image Data Signal 25 B5 Blue Image Data Signal (MSB) 26 GND Ground (0V) 27 28 29 30 31 DENB VCC VCC R/L U/D GND Data Enable Signal DC +3.3V Power Supply DC +3.3V Power Supply Horizontal Image Shift-direction Select Signal Vertical Image Shift-direction Select Signal Ground (0V)
Remark
Note 5-1 Note 5-2
Note 5-4 Note 5-5
Note 5-5:This pin must connect to ground, if without grounding the panel can't turn on. Note 5-1 : The relationship between DENB & SYNC. mode 1. DENB mode with the top priority. 2. When working with the SYNC. mode , The Hsync and Vsync determine the timings. 3. This pin must connect to ground, if without DENB.
Mode SYNC.
DENB Don't care Don't care
VGA Negative Negative
Hsync Polarization Vsync Polarization
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6
PD104VT2
Note 5-2 : DENB input signal.
If customer wanted to off the DENB mode , you must keep the DENB (pin 27) always High or Low.
800 tc 640 tc
DENB
Note 5-4 : The definitions of U/D & R/L U/D & R/L (PIN 30)= High U/D & R/L (PIN 30)= Low
5-2) Backlight driving
Connector type:BHR-03VS-1 (JST) , PIN No 3pin, pitch=4mm
Pin No 1 2 3 Symbol VL1 NC VL2 Description Input terminal (Hi voltage side) No Connection Input terminal (Low voltage side) Wire Color : White Note 5-3 Remark Wire color : Pink
Note 5-3 : Low voltage side of backlight inverter connects with ground of inverter circuits.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7
PD104VT2
6. Absolute Maximum Ratings : The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit.
Parameters Supply Voltage Input Signal Voltage Backlight Driving Voltage Backlight Driving Frequency Storage Temperature Operating Temperature Symbol Vcc VIN VL FL TST TOP MIN. -0.3 -0.3 0 -10 -10 MAX. +4.0 Vcc+0.3 2000 100 +70 +60 GND=0V, Ta=25 Unit Remark V V Note 6-1 V KHz Note 6-2
Note 6-1 : Input signals include CLK , Hsync , Vsync , DENB , R[0:5] , G[0:5] and B[0:5]. Note 6-2 : Optical characteristics shown in Table 9-1 are measured under Ta=+25.
7.Electrical Characteristics
7-1) Recommended Operating Conditions: Item Symbol Min. Supply Voltage Vcc 3.0 Current Dissipation Icc H level VIN 0.7 VCC Digital input voltage -0.1 L level VIL Lamp Current IFL 3.0 Lamp Voltage Lamp Initial Voltage VL VSFL 540 Lamp Driving Frequency Lamp Life Time FL 50 30000 Typ. 3.3 300 6.0 540 60 GND = 0VTa = 25 Max. Unit Remark 3.6 V 390 mA Note 7-1 VCC V 0.1 VCC V Per CCFL 8.0 mA Note 7-2 Note 7-4 650 Vrms Note 7-2 at Ta=25C 1060 Vrms Note 7-3 at Ta=0C 1300 Note 7-3 70 KHz Hrs Note 7-5
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8
PD104VT2
Note 7-1 : To test the current dissipation of Vcc, using the "color bars" testing pattern shown as below
1
2
3
4
5
6
7
8
1. 2. 3. 4. 5. 6. 7. 8.
White Yellow Cyan Green Magenta Red Blue Black
Idd current dissipation testing pattern Note 7-2 : The back-light driving waveform should be as closed to sine-wave as possible.
In order to satisfy the quality of B/L , no matter use what kind of inverter , the output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L.
Note 7-3 : Not including the efficiency of backlight DC/AC inverter The kick-off time must larger than 1 second Note 7-4 : Lamp current is measured with current meter for high frequency as shown below Lamp current dissipation testing configuration
1 2 3
NC
TFT-LCD MODULE
1 2 3
Inverter
NC
Ground Note1:Pin 1 is high voltage,Pin 2 NC, Pin 3 ground. Note2:One Lamp Current is 6mA.Two Lamp 12mA.
Note 7-5: The life time is determined as the time at which brightness of lamp is 50% compare to that of initial value at the typical lamp current.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9
PD104VT2
7-2) Input / Output signal timing chart Parameters CLK Frequency Period Display period Pulse width Back-porch Front-porch Hpw+Hbp Hsync-CLK Vsync-Hsync Period Vsync Display period Pulse width Back-porch Front-porch Vpw+Vbp CLK-DATA DATA-CLK Horizontal scanning period Horizontal display period Vertical display period Frame cycling period Symbol Fc=1/Tc tc Hp Hdp Hpw Hbp Hfp Hhc Hvh Vp Vdp Vpw Vbp Vfp Dcd Ddc T1 T2 T3 T4 515 12 12 136 10 0 515 2 2 1 31 10 10 780 Min. Typ. 25.175 40 31.778 800 640 96 48 16 144 0 16.8 525 480 2 33 10 35 Max. Unit MHz ns us tc tc tc tc tc tc ns tc ms Hp Hp Hp Hp Hp Hp ns ns tc tc T1 800 T1 Note Note 7-6
Hsync
139 139 151 Tc-10 200 800 35 35 38
Data
800 640 480 525
900
DENB
Note 7-6 : Tc is the period of sampling clock. In case of low-frequency , the image-flicker may occur.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10
PD104VT2
7-3) Display Time Range
(1) Vertical Timing :
Hsync
Hvh Vsync
(2) Horizontal Timing :
Hsync
Hhc CLK
tc
DATA R0~R5 , G0~G5 , B0~B5
Dcd
Ddc
(3) DENB Timing :
DENB
T1
T2
T3 1 DENB T4 480 1 2 3
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11
PD104VT2
(4) Detail of Horizontal Timing :
Hp
Hpw
Hsync
Hbp Hdp Hfp
Display period
(a) VGA-480 Mode (Hsync = Negative Polarization) Item Hpw Hbp Hdp Hfp Hp Description Horizontal Width Horizontal B-Porch Horizontal Display Horizontal F-Porch Horizontal Total Clock Cycles 96 48 640 16 800 Time 3.813 s 1.907 s 25.422 s 0.636 s 31.778 s
(5) Detail of Vertical Timing :
Vp
Vpw
Vsync
Vbp Vdp Vfp
Display period
(a) VGA-480 Mode (Vsync = Negative Polarization) Item Vpw Vbp Vdp Vfp Vp Description Vertical Width Vertical B-Porch Vertical Display Vertical F-Porch Vertical Total Horizontal Lines 2 33 480 10 525 Time 63.5 s 1.049 ms 15.253 ms 317.8 s 16.683 ms
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12
PD104VT2
7-5) Display Color and Gray Scale Reference Input Color Data Green 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 Color Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 Red 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 Blue 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Basic Colors
Red
1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00
Green
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 01 10
Blue
00000000000011110 00000000000011111 00000000000011111 1 0 1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13
PD104VT2
8. Power On Sequence
3.0 V
0 s< t <35 ms
0 s< t <35 ms
3.0 V
VCC
Signal 35ms 0<17ms
Backlight
1. The supply voltage for input signals should be same as VCC. 2. When the power is off , please keep whole signals (Hsync, Vsync, CLK, Data) low level or high impedance
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14
PD104VT2
9. Optical Characteristics
9-1) Specification: Parameter Horizontal Viewing Angle Vertical Symbol Condition (to 12 o'clock) CR10 (to 6 o'clock) CR Tr =0 Tf =0/=0 U x y =0 MIN. 40 10 25 200 290 70 30000 0.279 0.307 TYP. 45 15 40 MAX. Unit deg deg deg Note 9-1 Note 9-4 Note 9-2 Note 9-6 Ta=25 Remarks Note 9-3
Contrast Ratio Rise Response time Fall Brightness Luminance Uniformity Lamp Life Time White Chromaticity Cross Talk
400 15 ms 25 ms 330 cd/ 80 % hr 0.309 0.339 0.337 0.367 3.5 %
Note 9-5
All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure.
Photometer (TOPCON BM-5A or BM-7 fast)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15
500 mm +/- 50 mm
Field = 2 TFT-LCD module
DC/AC Inverter Optical characteristics measuring configuration
PD104VT2
Note 9-1The definitions of viewing angles are as follow
Lamp connector
12 o'clock
3 o'clock
9 o'clock
Note 9-2 : The definition of contrast ratio CR =
6 o'clock
Luminance at gray level 63 Luminance at gray level 0
Note 9-3Topcon BM-5A luminance meter 2field of view is used in the testing (after 30 minutes' operation). The typical luminance value is measured at lamp current 12.0 mA. Note 9-4: Definition of Response Time Tr and Tf:
White 100% 90% Brightness 10% 0% Tr Tf
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16
Black
White
PD104VT2
Note 9-5 : The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U= The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module
The test pattern is white (Gray Level 63).
1/6
2/6
2/6 1/6 1/6 2/6 2/6
x100%
1/6
Note 9-6 : Cross Talk (CTK) =
YA-YB YA YA : Brightness of Pattern A YB : Brightness of Pattern B Pattern A
Pattern B (Gray Level 31, central black box exclusive) YB 1/3 1/3 1/3 1/3 1/3 1/3 Black (Gray Level 0)
(Gray Level 31) YA
: Testing Point (A and B are at the same point.)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17
PD104VT2
10. Handling Cautions 10-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3. In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 10-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 10-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 10-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. 10-5) Polorizer mark The polorizer mark is to describe the direction of wide view angle film how to mach up with the rubbing direction.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18
PD104VT2
11. Reliability Test
No Test Item Test Ta = +70, 240 hrs Ta = -10, 240 hrs (No Condensation) 0 +60, 50 Cycles 1Hr 1Hr Frequency10 ~ 57 HZ , Amplitude0.5 mm 58~500Hz, 1G Sweep time: 11 min Test Period: 3 hrs (1 hr for each direction of X, Y, Z) 80G, 6ms, X,Y, Z 1 times for each direction 150pF, 330 Air: 15KV; Contact: 8KV 10 times/point, 9 points/panel face Condition Remark 1 High Temperature Storage Test 2 Low Temperature Operation Test 3 4 Operation Test Thermal Cycling Test (non-operating) Vibration Test (non-operating) Shock Test (non-operating) Electrostatic Discharge Test (non-operating) Ta: ambient temperature
High Temperature & High Humidity Ta = +60, 90%RH, 240 hrs
5
6
7
[Judgement Criteria] Under the display quality test conditions with normal operation state , there should be no change which may affect practical display function.
12. Indication of Lot Number Label
1. Indicated contents of the label
Lot number
OOO-OOOOOO PD104VT2XX
Module number
Contents of lot number : 1st--Process area : class 1000, 10K, 100K D 2nd~3rd--Module screen size(in inch) : 1.8"18, 10.4"A4...... 5th--Production year : 19999, 2000A, 20011........ 6th--Production month : 1, 2, 3,....9, A, B, C 7th~10th--Serial numbers : 0001~9999
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19
PD104VT2
13. Block Diagram
VL
GND
B a c k lig h t
IC V 1
1 1 2 3 23
IC V 2
IC V 3
IC V 4
IC V 5
1920
H SYNC IC H1 V SYNC Control Board
CLK
R [5 :0 ] G [5 :0 ] B [5 :0 ]
T F T -L C D D is p la y A re a
GND
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20
IC H2
478 479 480
VL B a c k lig h t
PD104VT2
14. Packing Diagram
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21
PD104VT2 Revision History
Rev. 1.0 1.1 Issued Date Sep 12,2002 Mar. 18,2003 Revised Contents
New
Modify Page 5 Mechanical Drawing(change PCBA outline dimension) Modify Page 6 TFT-LCD Panel Driving (pin 31 must connect to ground ) Modify Page 7-3 Input / Output signal timing chart (Back Porch form 49 to 48) Modify Page 17 Reliability test (High Temperature & High Humidity Operation Test from 60,95%RH to 60,90%RH) Add Page 17 10.Handling Cautions Add Page 18 12. Indication of Lot Number Label Modify Page 9 7-4 Display Time Range(remove positive input signal ) Modify Page 18 11. Reliability Test(remove low temperature storage test , low temperature operation test from 0 to -10) Modify Page 18 12. Indication of Lot Number Label Modify Page 4, 5 Mechanical Drawing Add Page 6 Support the DENB mode & Image Reversion : Up/Down and Left/Right Modify Page16 Contrast Ratio (CR from Typ.180,Min.100 to Typ.400,Min.200) Modify Page 20 Indication of Lot Number Label Page 8 Electrical Characteristics a.Input/Output signal timing chart b.Display Time Range Modify Page 7 Note 5-4:The definitions of U/D & R/L Modify Page 5 Mechanical Drawing Modify Page 21 Packing Diagram Page 9 Note 7-3 Add Lamp kick -off time
1.2
Mar. 31,2003
1.3
Aug. 26 ,2003
1.4
Nov. 25 ,2003
1.5 1.6 1.7
Mar. 18 ,2004 Sep. 14, 2004 Sep. 30, 2004
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22

▲Up To Search▲

Price & Availability of PD104VT2

	To Download PD104VT2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .